Siemens CU230P-2 HVAC Parameter Manual page 394

Sinamics g120 control units
Hide thumbs Also See for CU230P-2 HVAC:
Table of Contents

Advertisement

Parameters
List of Parameters
p20316
NCM 0 run-time group / NCM 0 RTG
Access level: 3
Can be changed: T
Min
5
Description:
Setting parameter for the run-time group in which the instance NCM 0 of the numeric comparator is to be called.
Value:
5:
6:
9999: Do not calculate
p20317
NCM 0 run sequence / NCM 0 RunSeq
Access level: 3
Can be changed: T
Min
0
Description:
Setting parameter for the run sequence of instance NCM 0 within the run-time group set in p20316.
Note:
The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20318[0...1]
CI: NCM 1 inputs / NCM 1 inputs
Access level: 3
Can be changed: T
Min
-
Description:
Sets the signal source of input quantities X0 and X1 of instance NCM 1 of the numeric comparator.
Index:
[0] = Input X0
[1] = Input X1
r20319
BO: NCM 1 output QU / NCM 1 output QU
Access level: 3
Unit: -
Description:
Display parameter for binary quantity QU of instance NCM 1 of the numeric comparator.
QU is only set if X0 > X1.
r20320
BO: NCM 1 output QE / NCM 1 output QE
Access level: 3
Unit: -
Description:
Display parameter for binary quantity QE of instance NCM 1 of the numeric comparator.
QE is only set if X0 = X1.
r20321
BO: NCM 1 output QL / NCM 1 output QL
Access level: 3
Unit: -
Description:
Display parameter for binary quantity QL of instance NCM 1 of the numeric comparator.
QL is only set if X0 < X1.
1-394
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Max
9999
Calculated: -
Scaling: -
Max
32000
Calculated: -
Scaling: PERCENT
Max
-
Calculated: -
Scaling: -
Calculated: -
Scaling: -
Calculated: -
Scaling: -
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
820
Data type: U32 / FloatingPoint32
Data set: -
Factory setting
0
Data type: Unsigned32
Data set: -
Data type: Unsigned32
Data set: -
Data type: Unsigned32
Data set: -
© Siemens AG 2009 All Rights Reserved

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cu230p-2 dpCu230p-2 can

Table of Contents