Siemens CU230P-2 HVAC Parameter Manual page 126
Sinamics g120 control units
Hide thumbs
Also See for CU230P-2 HVAC:
- Manual (732 pages) ,
- Original instructions manual (456 pages) ,
- Getting started (56 pages)
Table of Contents
Advertisement
Parameters
List of Parameters
p1011[0...n]
CO: Fixed speed setpoint 11 / n_set_fixed 11
Access level: 2
Can be changed: U, T
Min
-210000.000 [rpm]
Description:
Sets a value for the fixed speed / velocity setpoint 11.
Dependency:
Refer to: p1020, p1021, p1022, p1023, r1024, r1197
Notice:
A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
p1012[0...n]
CO: Fixed speed setpoint 12 / n_set_fixed 12
Access level: 2
Can be changed: U, T
Min
-210000.000 [rpm]
Description:
Sets a value for the fixed speed / velocity setpoint 12.
Dependency:
Refer to: p1020, p1021, p1022, p1023, r1024, r1197
Notice:
A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
p1013[0...n]
CO: Fixed speed setpoint 13 / n_set_fixed 13
Access level: 2
Can be changed: U, T
Min
-210000.000 [rpm]
Description:
Sets a value for the fixed speed / velocity setpoint 13.
Dependency:
Refer to: p1020, p1021, p1022, p1023, r1024, r1197
Notice:
A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
p1014[0...n]
CO: Fixed speed setpoint 14 / n_set_fixed 14
Access level: 2
Can be changed: U, T
Min
-210000.000 [rpm]
Description:
Sets a value for the fixed speed / velocity setpoint 14.
Dependency:
Refer to: p1020, p1021, p1022, p1023, r1024, r1197
Notice:
A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
p1015[0...n]
CO: Fixed speed setpoint 15 / n_set_fixed 15
Access level: 2
Can be changed: U, T
Min
-210000.000 [rpm]
Description:
Sets a value for the fixed speed / velocity setpoint 15.
Dependency:
Refer to: p1020, p1021, p1022, p1023, r1024, r1197
Notice:
A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
1-126
Calculated: -
Scaling: p2000
Max
210000.000 [rpm]
Calculated: -
Scaling: p2000
Max
210000.000 [rpm]
Calculated: -
Scaling: p2000
Max
210000.000 [rpm]
Calculated: -
Scaling: p2000
Max
210000.000 [rpm]
Calculated: -
Scaling: p2000
Max
210000.000 [rpm]
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
Data type: FloatingPoint32
Data set: DDS, p0180
Factory setting
0.000 [rpm]
Data type: FloatingPoint32
Data set: DDS, p0180
Factory setting
0.000 [rpm]
Data type: FloatingPoint32
Data set: DDS, p0180
Factory setting
0.000 [rpm]
Data type: FloatingPoint32
Data set: DDS, p0180
Factory setting
0.000 [rpm]
Data type: FloatingPoint32
Data set: DDS, p0180
Factory setting
0.000 [rpm]
© Siemens AG 2009 All Rights Reserved
Hide quick links:
Advertisement
Table of Contents
