Alcatel-Lucent 9500 MXC User Manual page 99

1
The Link/RAC options do not support NxE3. Where E3 trib connections are required, use the E13 mode
on the DAC 3xE3/DS3M.
3DB 23063 ADAA - Rev 004 July 2007
Relationship of Plug-in Cards to the Backplane
Figure 3-3.
RAC RAC
INU
NCC
DAC AUX
PDH and SDH Link Options and Backplane Maximums
Table 3-1.
Bus Rate Link Capacity Options
E1 5x, 10x, 16x, 20x, 32x, 40x, 52x, 64x,
75x, 93x, 100x
DS-1 4x, 8x, 14x, 16x, 28x, 32x, 56x, 70x,
84x, 100x, 127x
DS-3 1x, 2x, 3x, 4x
STM1/OC-3 1x, 2x
Ethernet Link and Backplane Maximums
Table 3-2.
Bus Rate Link Capacity Options
Nx2.048 Mbps 8 to 204 Mbps
Nx1.544 Mbps 6 to 154 Mbps
Nx155.52 Mbps 155.5 or 311 Mbps
For more information on the traffic handling maximums of a Node when used in
linear and ring network configurations, refer to Node Capacity Rules,
Appendix G.
9500 MXC User Manual
RAC
Backplane Max.
1
100x
128x
6x
2x
Backplane Max.
204 Mbps
198 Mbps
311 Mbps
Vol. II-3-5