Alcatel-Lucent 9500 MXC User Manual page 807

DAC 4x and IDU RJ-45 to BNC Cable Assembly
3DB 23063 ADAA - Rev 004 July 2007
The assembly is provided as a kit of three cables. Each kit provides:
• One RJ-45 to 2 x BNC female, 0.5m long. Refer to Figure C-11.
• Two BNC to BNC male extension cables, 2m long.
The kit is labelled as a 2.5m cable kit:
• RJ-45 to 2xBNC, 2.5m, Part No: 3CC52022AAAA
Each supports one trib. Four are required if all four ports of the DAC 4x are to be
connected. Twenty are required if all ports of the IDU 20x are to be connected.
DAC 4x and IDU RJ-45 to BNC Cable
Figure C-11.
RJ-45
8
1
RX connects to pins 1&2
TX connects to pins 4&5
9500 MXC User Manual
Data in
RX
TX
Data out
75 ohm BNC female
connectors
Vol. VI-C-15