Alcatel-Lucent 9500 MXC User Manual page 371

9500 MXC Node
Select >
Configuration Plug-Ins
the plug-in.
Edit, if required, using the settings specified in the
installation datapack. Remove the Tx Mute, if set.
Refer to Node and Terminal Plug-ins on page 7-1 for
details.
9500 MXC Node
Select >
Configuration Protection
configure protection settings.
Refer to Node Protection on page 8-1 for details.
9500 MXC Node
Select >
Configuration Circuits
circuit connections.
Refer to Circuits on page 9-1 for details.
9500 MXC Node
Select >
Configuration Networking
addressing and routing, and if required, trap
destinations.
Refer to Networking Configuration on page 10-1 for
details.
3DB 23063 ADAA - Rev 004 July 2007
7. Configuration: Plug-ins
to view settings for
8. Configuration: Protection
to view and
9. Configuration: Circuits
to view and set
10. Configuration: Networking
to set IP
9500 MXC Terminal
Select >
Configuration Plug-Ins
Terminal modules.
Edit, if required, using the settings specified in the
installation datapack. Remove the Tx Mute, if set.
Refer to Node and Terminal Plug-ins on page 7-1 for
details.
9500 MXC Terminal
Select >
Configuration Protection
protection settings.
Refer to Terminal Protection on page 8-17 for details.
9500 MXC Terminal
PDH and SDH IDUs do not present a Circuits screen
option.
The IDU ES includes a Circuits screen - functionality for
its Ethernet and tributary modules is identical to the Node.
Select >
Configuration Circuits
Refer to Circuits on page 9-1 for details.
9500 MXC Terminal
Select >
Configuration Networking
and routing, and if required, trap destinations.
Refer to Networking Configuration on page 10-1 for
details.
9500 MXC User Manual
to view settings for the
to view and configure
to view and set.
to set IP addressing
Vol. IV-3-9