Recommended Actions
Port Loopback Active
Probable Cause
Recommended Actions
Port Monitoring Active
Probable Cause
Recommended Actions
Additional Information
Direct Link Active
Probable Cause
Recommended Actions
3DB 23063 ADAA - Rev 004 July 2007
To remove the alarm, deselect the loopback.
DAC ES port data looped back to channel/radio path. This is a warning alarm.
A channel/radio facing (TDM bus facing) loopback has been established on a
DAC ES port using commands in the CT System Controls screen.
To remove the alarm, deselect the loopback.
A DAC ES / DAC GE port has been set to monitor another port. This is a
warning alarm.
Port monitoring has been established on a DAC ES / DAC GE port using
commands in the CT System/Controls screen.
To remove the alarm, deselect the monitoring.
Port monitoring allows an unused port to connect across a selected port to
facilitate transparent attachment of test equipment for traffic monitoring
purposes.
A direct port-to-channel link has been set. This is a warning alarm.
A port-to-channel link has been established on a DAC ES / DAC GE using
commands in the CT System/Controls screen.
To remove the alarm, deselect the option.
9500 MXC User Manual
Vol. VI-B-47