Table of Contents
Advertisement
About This Manual
Welcome to 9500 MXC
Purpose
Intended Audience
3DB 23063 ADAA - Rev 004 July 2007
The 9500 MXC Microwave Radio System comprises Node and the Terminal
variants. Both are split-architecture radios with an antenna-mounted outdoor unit
and a rack-mounted indoor unit.
The 9500 MXC Node supports multiple point-to-point radios for PDH, SDH,
and/or Ethernet, on a single product platform, to form a complete network node
for star or ring configurations on frequency bands from 6 to 38 GHz.
The 9500 MXC Terminal is optimized for single-link installations or where
back-to-back network connection of terminals is preferred. Terminals may also
be used to spur from a 9500 MXC Node. Different versions are available for
PDH, SDH or Ethernet, on frequency bands 5 to 38 GHz.
This manual provides information on installing, commissioning and
troubleshooting a 9500 MXC microwave radio system. Technical descriptions
are at a module and system level.
The information in this manual is for use by trained technicians or engineers. It
does not provide information or instruction on basic technical procedures.
Alcatel-Lucent recommends you read the relevant sections of this manual
thoroughly before beginning any installation or operational procedures on the
9500 MXC.
xxv
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
