Alcatel-Lucent 9500 MXC User Manual page 349

Installing the V.24 Modem Driver for USB
Installing V.24 Dial-up Connection for USB
3DB 23063 ADAA - Rev 004 July 2007
3. Change the COM port number in the drop box to the desired selection.
4. Click and to return to the Device Manager window.
OK OK
5. Close the Device Manager and click
window.
This completes installation of the USB adaptor and confirmation of its COM
port.
To enable some USB adaptors it may be necessary to connect the adaptor before
starting the computer.
Next Step
Installing the V.24 Modem Driver for USB on page 2-17.
To install the V.24 modem driver:
1. Select >
Start Settings
2. Select
Phone and Modem Options
3. In the Add Hardware window, select
. Click
it from a list
4. Select and browse to the 9500 MXC Installation Kit CD to select
Have Disk
the 9500 MXC V.24 Modem Driver.inf file. Click
5. In the Install from disk window, select the CDROM drive and click
6. If a prompt appears saying 'This driver is not digitally signed', ignore and
click
Next .
7. For a USB serial adaptor you must select the same COM port assignment as
determined in Installing the USB-to-Serial Adapter on page 2-16, and click
.
Next
8. For a USB adaptor installation a warning message may state that the particular
driver has not passed Windows Logo testing to ensure Windows XP
compatibility. Ignore and click
9. Click , then
Finish OK
To install the V.24 dial-up connection for USB:
1. Select >
Start Settings
2. Select
Network Connections
3. Under new tasks, select
to close the System Properties
OK
> .
Control Panel
>
Modems
Don't detect my modem; I will select
Next .
Continue anyway
to complete the installation.
> .
Control Panel
.
Create a new connection
9500 MXC User Manual
.
> Add
.
Open
OK .
.
to open a New Connection
Vol. IV-2-17