Next Step - Alcatel-Lucent 9500 MXC User Manual

Procedure

Next Step

3DB 23063 ADAA - Rev 004 July 2007
1. Establish a V.24 connection to the Node/Terminal.
2. Go to the
Configuration
For Single IP Addressing, the displayed IP address is the address required.
For Interface Addressing (Advanced), the required IP address is the address
of the Ethernet Port.
For a description of Single IP and Interface Addressing refer to the topic, 9500
MXC Address and Routing Options on page 10-2.
3. Log-off and reconnect your PC for an Ethernet connection
4. Enter the IP address from step 2, and click Connect.
Table 2-3 directs you to relevant sections of the 9500 MXC CT volume.
Reference Topics
Table 2-3.
9500 MXC CT Topic
System Summary screen
Screen navigation, logos, and icons
Installation and Configuration
Diagnostics
> screen to view IP address settings.
Networking
Reference
System Summary on page 15-2, Volume IV
9500 MXC CT Screens on page 1-1, Volume IV
Procedure Overview for a New Installation on
page 3-7, Volume III
Volume IV, Chapter 15.
9500 MXC User Manual
Vol. IV-2-29