Front Panel Layout - Alcatel-Lucent 9500 MXC User Manual

Front Panel Layout

IDU 20x Front Panel Layout
Figure 2-1.
3
1 2
IDU 155o Front Panel Layout
Figure 2-2.
1 2 3
Front Panel Layout Description
Table 2-4.
No Item/Label
1 Rack Ear and
Grounding Stud
2 -48 Vdc
3 Fuse
4 To ODU
5 Maint V.24
6 Aux Data
3DB 23063 ADAA - Rev 004 July 2007
• Figure 2-1 shows the IDU 20x front panel.
• Figure 2-2 shows the IDU 155o front panel.
• Refer to Table 2-4 for names and descriptions of numbered components.
4 5 12 6 7
4 5 6
Description
Rack attachment bracket for the IDU. One ear has a grounding stud for IDU
grounding. The ears can be fitted either side and provide flush-with-rack-front
mounting.
2-pin D-series 2W2C power connector. Includes screw fasteners.
5A time-lag fuse and power on/off switch. ON is when the fuse head is in the
vertical position; OFF is when the head is rotated to the horizontal '0' position.
Type N female connector for jumper cable connection to the surge suppressor
located at the cable entry point to the building.
RJ-45 connector provides a V.24 serial interface option for 9500 MXC CT (CT)
connection. It supports a default IP address, which means knowledge of the
Terminal IP address is not required at login.
DB-9 connector provides one synchronous or asynchronous data service
channel. Selection of synchronous (64 kbps) or asynchronous (max 19.2 kbps)
is via 9500 MXC CT.
8 9 13
7 8 9
9500 MXC User Manual
12 16
Vol. II-2-7