Alcatel-Lucent 9500 MXC User Manual page 289

3DB 23063 ADAA - Rev 004 July 2007
9500 MXC Node is now ready for power-on.
Once powered up the ODU(s) will be transmitting with the pre-configured or
ex-factory frequency and power settings unless the start-up transmit mute option
has been invoked. (All ODUs shipped ex-factory have the transmit-mute set as
the default unless otherwise specified).
If frequency and power settings are not correct, interference can be caused to
other links in the same geographical area.
13. Power on by connecting the power cable to the NCC.
The DC power connector can be shorted inadvertently if applied at an angle.
Always insert with correct alignment.
Next Step
The 9500 MXC Node is ready for configuration and antenna alignment.
• Refer to Volume IV, Chapter 4, for configuration.
• Refer to Volume III, Chapter 5, for antenna alignment.
9500 MXC User Manual
Vol. III-3-7