DAC 4x and IDU RJ-45 to RJ-45 Straight Cable
Vol. VI-C-16
Connectors at both ends of the cable are wired pin-for-pin as shown in
Figure C-12. It provides a balanced 120 ohm connection.
• RJ-45 to RJ-45, 2m, Part No: 3CC52016AAAA
• RJ-45 to RJ-45, 5m, Part No: 3CC52019AAAA
Each assembly supports one trib. Four cable assemblies are required if all four
ports of the DAC 4x are to be connected. Twenty are required if all ports of the
IDU 20x are to be connected.
Straight cable assemblies are used when connecting to RJ-45 patch panels, which
have a built-in crossover function.
DAC 4x RJ-45 to RJ-45 Straight Cable Connections
Figure C-12.
Pin
Pin
Function
Receive Ring
1
1
2
2
Receive Tip
3
3
Optional Ground
4
4
Transmit Ring
5
5
Transmit Tip
6
6
Optional Ground
7
7
Ground
8
8
Ground
Alcatel-Lucent