Alcatel-Lucent 9500 MXC User Manual page 585

3DB 23063 ADAA - Rev 004 July 2007
Item Description
3 Detail window. Presents higher resolution data and the ability to select a report
range. The most recent data is to the right side of the window.
Data is separately displayed for Tx and Rx traffic and for events.
• Throughputs, frame types, discards and errors are graphed. Mouse-over to
identify the data. To view graphed data with higher resolution click on the
down arrow-head to the left of the divider bar. See Item 7.
• The period displayed (number of bins) is selected in the summary window
(Item 2).
• Each bin is presented as a vertical segment, with the width of the segment
dependent on the period selected.
Where data is incomplete the relevant bin segments are shown with dark grey
highlighting and 'Incomplete' will appear at the top of the segment when
moused-over. See Item 6.
i) Statistical data is displayed for a selected bin, simply mouse-over to display.
Any bin within the window can be selected. The type of data presented is the
same as that for the Ethernet Stats report, see Item 4.
ii) Select a report range (optional), as shown by the blue-grey highlighted
selection. Select the full period by double-clicking in the window, or select a
range by clicking in the window and dragging. Data for the selection is
displayed in the Report windows see Items 4 to 6.
iii) Red bars at the bottom of a bin indicate that an event (alarm or
informational) has occurred during the bin period. To view events, select the
Events report tab. See Item 5. Events are mirrored from the Events Browser
screen.
i ii
iii
9500 MXC User Manual
Vol. IV-15-23