Chapter 2. Outdoor Installations
Installation of the Suppressor on the ODU
Figure 2-19.
Type N connectors must
be weatherproofed
Vol. III-2-30
When a suppressor is installed with its support bracket, the bracket provides
single-point grounding for the assembly. Refer to Installing a Suppressor With a
Support Bracket on page 2-32.
Installation is shown in Figure 2-19.
When the suppressor is installed without the support bracket, the suppressor
and ODU must be separately grounded. Refer to Installing a Suppressor Without
a Support Bracket on page 2-37.
body
The
of the suppressor does not need to be weatherproofed.
Ground wire for
suppressor and ODU
Support bracket
ODU cable attachement
Ground stud
RSSI connector
Suppressor
Right angle
connector
Alcatel-Lucent