Alcatel-Lucent 9500 MXC User Manual page 340

Chapter 2. Setting Up 9500 MXC CT
Next Step
Example - Changing TCP/IP Properties
TCP/IP Properties Before
Vol. IV-2-8
are physically connecting to.
Existing settings for a DNS server may be ignored.
9. Click , then
OK OK
This procedure must be repeated when physically connecting to other 9500 MXC
Nodes/Terminals in the network.
Starting 9500 MXC CT on page 2-19.
The following screens provide an example of changing the TCP/IP properties and
makes note of the points you must be aware of when changing these properties.
The 9500 MXC you are connecting to has an IP address of 192.168.10.1 and a
subnet mask of 255.255.255.0. The subnet mask indicates that the network
portion of the IP address is 192.168.10, and that the host portion is 1.
again to confirm the settings and exit.
TCP/IP Properties After
Alcatel-Lucent