Alcatel-Lucent 9500 MXC User Manual page 834

Single Link
Vol. VI-D-8
Figure D-1 on page D-8 shows one INU to INU link:
• Class C network addressing has been selected.
• Static and dynamic routing options are shown.
• A CT PC is shown connected to Node B. Node B has been selected as the
default gateway in the PC TCP/IP settings to support access to Node A. The
default gateway avoids the need to enter a static route for Node A on the PC
(using DOS commands).
9500 MXC Node Routing Example 1
Figure D-1.
9500 MXC Nodes A and B
INU
Node A
IP Address: 192.168.1.1
Mask: 255.255.255.0
NODES
Select Single IP Addressing and Static or Dynamic Routing
Static Routing: Destination
Node A: 192.168.2.0
Node B: 192.168.1.0
Dynamic Routing: Select OSPF or RIP
* The number associated with the Link references indicates the RAC slot number
9500 MXC CT PC
Enter compatible IP settings for the Ethernet LAN connection
192.168.2.2
IP address:
Subnet mask: 255.255.255.0
Default gateway: 192.168.2.1
INU
Radio path
Node B
Link 1* Link 1*
192.168.2.1
255.255.255.0
Subnet Mask Interface
255.255.255.0 Link 1 NMS
255.255.255.0 Link 1 NMS
CT PC
Ethernet
Next Hop
0.0.0.0
0.0.0.0
Alcatel-Lucent