Alcatel-Lucent 9500 MXC User Manual page 345

Installing Dial-up Connection for Serial COM port: Windows 2000 & 98
Installing a Dial-up Connection for Serial COM Port: Windows XP
3DB 23063 ADAA - Rev 004 July 2007
The 9500 MXC modem driver must first be installed.
To configure the dial-up connection:
1. From the PC Control Panel, select
Make New Connection
The Network Connection Wizard window is displayed.
2. Click .
Next
3. Select
Dial up to private network
4. Select
Modem - 9500 MXC V.24 Modem [38400 bps]
If the 9500 MXC V.24 Modem is the only modem installed, it is automatically
assigned to the new network connection.
5. Enter a number in the phone number box (any number) and click
6. Type the name you want to use for this connection.
7. Select the
Add a short cut to my desktop
8. To complete the installation, click
To check setup and operation, refer to the topic Starting 9500 MXC CT on
page 2-19.
This procedure sets an Internet dial-up connection. The 9500 MXC modem
driver must first be installed.
To configure the connection:
1. From the PC Control Panel, select
. The New Connection Wizard is displayed.
connection
2. Click .
Next
3. Select Connect to the Internet.
4. Select Setup my connection manually.
5. Select Connect using a dial up modem.
6. Select 9500 MXC V.24 Modem 38400bps.
7. Type in an ISP Name or a name for the connection, such as 9500 MXC.
8. Enter any phone number, such as 1234567 (the dial up connection may not
work if the phone number is left blank).
9. Select Anyone's use.
Network and Dial-Up Connections
.
and click
Next
option.
.
Finish
Network Connections
9500 MXC User Manual
>
.
and click .
Next
.
Next
>
Create a new
Vol. IV-2-13