Power Cable; Fuses - Alcatel-Lucent 9500 MXC User Manual

Power Cable

Fuses

3DB 23063 ADAA - Rev 004 July 2007
The power cable is supplied in the IDC Installation Kit. It is supplied with the
connector fitted at one end and wire at the other. The cable is nominally 5 m
(16 ft), and the wires are 4 mm
The blue (or red) wire must be connected to -48 Vdc (live); the black wire to
ground/+ve.
Power Cable and Connector
Figure 3-2.
DC power connector can be shorted inadvertently if applied at an angle. Always
insert with correct alignment.
The NCC and NPC are fitted with a fast acting 25 A fuse fitted on the PCB
behind the power cable connector.
2
(AWG 12).
9500 MXC User Manual
Vol. III-3-3