Alcatel-Lucent 9500 MXC User Manual page 835

Small Four Node Network
3DB 23063 ADAA - Rev 004 July 2007
Figure D-2 shows a small 9500 MXC-only network. Both static and dynamic
routing options are shown.
• Class C network addressing is used.
• This example shows that dynamic routing is a much easier option.
• Figure D-3 on page D-10 shows the CT static routing screen for Node B.
• The CT PC is shown connected to Node A, with Node entered as the default
gateway.
9500 MXC Node Routing Example 2
Figure D-2.
9500 MXC Nodes: A, B, C, D
Ethernet
CT PC
INU
Node A
Link 3
192.168.1.1
255.255.255.0
Select Single IP Addressing and Static or Dynamic Routing (Dynamic recommended)
Static Routing: Destination
Node A: 192.168.2.0
192.168.3.0
192.168.4.0
Node B: 192.168.1.0
192.168.3.0
192.168.4.0
Node C: 192.168.2.0
192.168.1.0
192.168.4.0
Node D: 192.168.2.0
192.168.3.0
192.168.1.0
Dynamic Routing: Select OSPF or RIP
9500 MXC CT PC
Enter compatible IP settings for the Ethernet LAN connection
192.168.1.2
IP address:
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
192.168.3.1
255.255.255.0
Radio
Link 2
INU
Radio
Node B
Link 1
Link 3
192.168.2.1
255.255.255.0
Subnet Mask Interface
255.255.255.0 Link 3 NMS
255.255.255.0 Link 3 NMS
255.255.255.0 Link 3 NMS
255.255.255.0 Link 1 NMS
255.255.255.0 Link 2 NMS
255.255.255.0 Link 3 NMS
255.255.255.0 Link 1 NMS
255.255.255.0 Link 1 NMS
255.255.255.0 Link 1 NMS
255.255.255.0 Link 1 NMS
255.255.255.0 Link 1 NMS
255.255.255.0 Link 1 NMS
9500 MXC User Manual
INU
Node C
Link 1
INU
Radio
Node D
Link 1
192.168.4.1
255.255.255.0
Next Hop
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Vol. VI-D-9