Before Going On Site; Tools And Material - Alcatel-Lucent 9500 MXC User Manual

Before Going On Site

Tools and Material

Required Tools and Material
Table 1-1.
Equipment Tool/Material
Antenna As required by the
manufacturer
9500 MXC Basic electrician's toolkit
Radios
Open-ended spanners
Torque wrench
Connector crimp tool
Cut-off tool
Hot-air gun
Protective grease and
zinc-rich paint
BNC cable
3DB 23063 ADAA - Rev 004 July 2007
This section includes:
• Tools and Material
• Unpacking the Equipment
Ensure you have the following tools and material before going to site.
Table 1-1 lists the tools and material that must be sourced or supplied by the
installer.
Description
Alcatel-Lucent offers antennas from various suppliers. Refer to
the manufacturer's data supplied with each antenna for required
and recommended installation tools and equipment.
The kit must include a crimp tool for attaching lugs to stranded
copper cable, a multimeter, and a set of metric Allen keys for the
polarization rotator bolts.
19 mm (3/4") open-ended spanner for attaching the ODU to the
mounting collar.
Capable of 66 N-m or 50 ft-lb, with a selection of sockets for
antenna mount fastening
Where crimp-type coax connectors are used, ensure the correct
crimp tool is used.
Where solid-outer coax is used for the ODU cable, the correct
cut-off tool should be used to avoid damage to the cable outer.
For use on heat-shrink tubing.
For weather-protecting grounding attachment points on towers
and grounding bars.
To access the RSSI voltage at the ODU for antenna alignment.
This could be a BNC to banana plugs cable for connection to a
multimeter. Such a cable is available as an optional accessory
from Alcatel-Lucent.
9500 MXC User Manual
Vol. III-1-3