Alcatel-Lucent 9500 MXC User Manual page 788

Low Memory
NMS Configuration Error
POST Failed
Power On
Protected Partner Mismatched Software Version
Protection Switch
Protection Switch Failure
Ring Configuration Mismatch
Ring Manual Mode Disabled
Ring Manual Mode Enabled
Vol. VI-B-62
The notes field will provide details of the type of memory and remaining size.
The NMS configuration is invalid.
Power on self test did not complete without errors. The log entry identifies the
failed test.
The INU has completed a power on reset. Note that this entry could be replaced
by the standard cold start trap.
The protected partner does not have the same software version. The notes field
will display the local and partnered software versions.
Protection switch has occurred. The log entry will include details of the reason
for the switch. Applies to RAC and DAC protection.
A required protection switch was unable to occur. The log entry will include
details of the reason for the failure.
The ring configuration is mismatched to its neighbour node (eg. primary -
primary).
The manual ring wrap or unwrap mode has been deconfigured by the user.
The manual ring wrap or unwrap mode has been configured by the user. The log
entry serves as a warning that no automatic ring switching will take place while
this mode is active.
Alcatel-Lucent