Alcatel-Lucent 9500 MXC User Manual page 896

T1
digital carrier system for DS1 signal
A
T1 is a term for a digital facility used to transmit a DS1 formatted digital signal at 1.544 megabits per second.
The 'T' is about the carrier facility and the 'DS' is about the signal format, which includes the muxed relationship
between DS0, DS1, DS2, and DS3.
T3
T3 is a term for a digital facility used to transmit a DS3 formatted digital signal at 44.7 megabits per second.
The 'T' is about the carrier facility and the 'DS' is about the signal format, which includes the muxed relationship
between DS0, DS1, DS2, and DS3.
TAE
Transversal Adaptive Equalization
TAPI
elephony Application Programming Interface.
T
TBD
To be determined
TCP/IP
Transport Control Protocol/Internet Protocol
TCXO
Temperature Controlled Crystal Oscillator
TELNET
A terminal emulation program for TCP/IP networks such as the Internet. The Telnet program runs on your
computer and connects your PC to a server on the network. You can then enter commands through the Telnet
program and they will be executed as if you were entering them directly on the server console. This enables you
to control the server and communicate with other servers on the network. To start a Telnet session, you must
log in to a server by entering a valid username and password. Telnet is a common way to remotely control Web
servers.
Terminal
A 9500 MXC IDU with associated ODU. Different versions are available for PDH, SDH or Ethernet traffic.
TFTP
rivial File Transfer Protocol
T
TIM
Tributary Interface Module
TMN
Telecommunications Management Network
Tombstone
A database stored in the nonvolatile memory that contains the radio configuration parameters.
Trap
22 Alcatel-Lucent