Alcatel-Lucent 9500 MXC User Manual page 430

Chapter 7. Node and Terminal Plug-ins
Vol. IV-7-40
Item Description
6 Tributary Lines. User-defined entries for:
• Commissioned. The trib must be ticked as commissioned for it to carry
traffic. When commissioned an LOS alarm is raised if LOS is detected, and
an AIS alarm is raised if AIS is detected.
• Name. The trib can be named/identified.
7 Icons indicate trib in/out status. Mouse-over for tooltip support.
8 Indicates the optical line transceiver type installed, short or long range.
Typical DAC 155oM Bus Ports Screen
Figure 7-11.
3
Item Description
1 Select between E1 or DS1 backplane mapping. The same selection must also
be set as the backplane bus type in the Circuits screen.
1
2
4
5
Alcatel-Lucent