Info-Center Synchronous - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Usage guidelines
If you do not set an output rule for a module, the module uses the output rule set by using the default
keyword. If no rule is set by using the default keyword, the module uses the default output rule.
To modify or remove an output rule set for a module, you must use the module-name argument. A
new output rule configured by using the default keyword does not take effect on the module.
If you execute this command for a module multiple times, the most recent configuration takes effect.
If you execute this command for the default modules multiple times, the most recent configuration
takes effect.
Examples
# Output only VLAN module's information with the emergency level to the console.
<Sysname> system-view
[Sysname] info-center source default console deny
[Sysname] info-center source vlan console level emergency
# Based on the previous configuration, disable output of VLAN module's information to the console
so no system information is output to the console.
<Sysname> system-view
[Sysname] undo info-center source vlan console

info-center synchronous

Use info-center synchronous to enable synchronous information output.
Use undo info-center synchronous to disable synchronous information output.
Syntax
info-center synchronous
undo info-center synchronous
Default
Synchronous information output is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
System log output interrupts ongoing configuration operations, including obscuring previously
entered commands. Synchronous information output shows the obscured commands. It also
provides a command prompt in command editing mode, or a [Y/N] string in interaction mode so you
can continue your operation from where you were stopped.
Examples
# Enable synchronous information output, and then execute the display current-configuration
command to view the current configuration of the device.
<Sysname> system-view
[Sysname] info-center synchronous
Info-center synchronous output is on
[Sysname] display current-
347