Configuring Lisp Esm Multihop Mobility; Finding Feature Information - Cisco Nexus 7000 Series Configuration Manual

Configuring LISP ESM Multihop Mobility

This chapter describes how to configure the Extended Subnet Mode (ESM) multihop mobility feature to
separate the Locator/ID Separation Protocol (LISP) dynamic host detection function from the LISP
encapsulation/decapsulation function within a LISP topology.
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release might not support all the features documented in this module. For the latest caveats
and feature information, see the Bug Search Tool at
for your software release. To find information about the features documented in this module, and to see a list
of the releases in which each feature is supported, see the "New and Changed Information"chapter or the
Feature History table in this chapter.
Finding Feature Information, on page 19
Information About LISP ESM Multihop Mobility, on page 20
Licensing Requirements for LISP, on page 20
Guidelines and Limitations for LISP ESM Multihop Mobility, on page 20
Default Settings for LISP, on page 20
Configuring LISP ESM Multihop Mobility, on page 21
Configuration Examples for LISP ESM Multihop Mobility, on page 27
Additional References, on page 31
Feature Information for LISP ESM Multihop Mobility, on page 32
C H A P T E R
https://tools.cisco.com/bugsearch/
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
3
and the release notes
19