Setting The Statistics Polling Interval - HP 3600 v2 series Configuration Manual

In interface or port group view, you set the maximum size of broadcast, multicast or unknown unicast
traffic allowed to pass through an interface or each interface in a port group. When the broadcast,
multicast, or unknown unicast traffic on the interface exceeds this threshold, the system discards packets
until the traffic drops below this threshold.
Follow these steps to set storm suppression thresholds on one or multiple Ethernet interfaces:
To do...
Enter system view
Enter Ethernet interface view or
port group view
Set the broadcast suppression
threshold ratio
Set the multicast suppression
threshold ratio
Set the unknown unicast
suppression threshold ratio
NOTE:
For an Ethernet interface that belongs to a port group, if you set a traffic suppression threshold for the
interface in both Ethernet interface view and port group view, the threshold configured last takes effect.

Setting the statistics polling interval

Follow these steps to set the statistics polling interval globally or on an Ethernet interface:
To do...
Enter system view
Enter Ethernet interface view
Set the statistics polling interval on
the Ethernet interface
To display the interface statistics collected in the last polling interval, use the display interface command.
To clear interface statistics, use the reset counters interface command.
Use the command...
system-view
•
Enter Ethernet interface view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual port-group-name
broadcast-suppression { ratio | pps
max-pps | kbps max-kbps }
multicast-suppression { ratio | pps
max-pps | kbps max-kbps }
unicast-suppression { ratio | pps
max-pps | kbps max-kbps }
Use the command...
system-view
interface interface-type
interface-number
flow-interval interval
10
Remarks
—
Use either command.
To configure storm suppression
on an Ethernet interface, enter
Ethernet interface view.
To configure storm suppression
on a group of Ethernet interfaces,
enter port group view.
Optional
By default, all broadcast traffic is
allowed to pass through.
Optional
By default, all multicast traffic is
allowed to pass through.
Optional
By default, all unknown unicast
traffic is allowed to pass through.
Remarks
—
—
Optional
The default interface statistics
polling interval is 300 seconds.