Rate limit configuration procedure
Step
1.
Configuring rate limit on a port
Priority mapping table configuration procedure
Step
1.
Configuring priority mapping tables
Priority trust mode configuration procedure
Step
1.
Configuring priority trust mode on a port
Adding a class
1.
Select QoS > Classifier from the navigation tree.
2.
Click the Create tab to enter the page for adding a class.
Figure 486 Adding a class
Remarks
Required.
Limit the rate of incoming packets or outgoing packets
of a physical port.
Remarks
Required.
Set priority mapping tables.
Remarks
Required.
Set the priority trust mode of a port.
479