Recommended priority trust mode configuration procedure
Step
1.
Configuring priority trust mode on a port
Adding a class
1.
Select QoS > Classifier from the navigation tree.
2.
Click the Create tab to enter the page for adding a class.
Figure 482 Adding a class
3.
Add a class as described in
4.
Click Create.
Table 145 Configuration items
Item
Classifier Name
Operator
Table
145.
Description
Specify a name for the classifier to be added.
Specify the logical relationship between rules of the classifier.
•
and—Specifies the relationship between the rules in a class as logic AND. The
device considers a packet belongs to a class only when the packet matches all the
rules in the class.
•
or—Specifies the relationship between the rules in a class as logic OR. The device
considers a packet belongs to a class as long as the packet matches one of the rules
in the class.
504
Remarks
Required.
Set the priority trust mode of a port.