Configuring The Maximum Number Of Concurrent Users; Configuring The Exception Handling Method - HP 830 Series Configuration Manual

Step
2. Configure the incoming
banner.
3. Configure the login banner.
4. Configure the legal banner.
5. Configure the shell banner.
6. Configure the MOTD banner.
Configuring the maximum number of concurrent
users
You can configure this command to limit the number of users that can enter the system view
simultaneously. When the number of concurrent users reaches the upper limit, other users cannot enter
system view.
When multiple users configure a setting in system view, the most recent configuration takes effect.
To configure the maximum number of concurrent users:
Step
1. Enter system view.
2. Configure the maximum
number of concurrent users.

Configuring the exception handling method

You can configure the device to handle system exceptions by using one of the following methods:
reboot—The device automatically reboots to recover from the error condition.
•
maintain—The device stays in the error condition so you can collect complete data, including error
•
messages, for diagnosis. In this approach, you must manually reboot the device.
To configure the exception handling method:
Step
1. Enter system view.
2. Configure the exception
handling method for the
system.
Command
header incoming text
header login text
header legal text
header shell text
header motd text
Command
system-view
configure-user count number
Command
system-view
system-failure { maintain | reboot }
110
Remarks
Optional.
Optional.
Optional.
Optional.
Optional.
Remarks
N/A
By default, up to two users can
perform operations in system view
at the same time.
Remarks
N/A
By default, the system uses the
reboot method when an exception
occurs.