Table of Contents
Advertisement
Step
4.
Set a password.
5.
Configure common settings
for console login.
The next time you attempt to log in through the console port, you must provide the configured login
password.
Configuring scheme authentication for console login
Follow these guidelines when you configure scheme authentication for console login:
•
To make the command authorization or command accounting function take effect, apply an
HWTACACS scheme to the intended ISP domain. This scheme must specify the IP address of
the authorization server and other authorization parameters.
•
If the local authentication scheme is used, use the authorization-attribute level level
command in local user view to set the user privilege level on the device.
•
If a RADIUS or HWTACACS authentication scheme is used, set the user privilege level on the
RADIUS or HWTACACS server.
To configure scheme authentication for console login:
Step
1.
Enter system view.
2.
Enter AUX user interface
view.
3.
Enable scheme
authentication.
4.
Enable command
authorization.
Command
set authentication password
[ hash ]{ cipher | simple }
password
See
"Configuring common
console login settings
Command
system-view
user-interface aux first-number
[ last-number ]
authentication-mode scheme
command authorization
26
Remarks
By default, no password is set.
Optional.
(optional)."
Remarks
N/A
N/A
Whether local, RADIUS, or
HWTACACS authentication is
adopted depends on the configured
AAA scheme.
By default, console log users are
not authenticated.
Optional.
By default, command authorization
is disabled. The commands
available for a user only depend on
the user privilege level.
If command authorization is
enabled, a command is available
only if the user has the
commensurate user privilege level
and is authorized to use the
command by the AAA scheme.
Advertisement
Table of Contents
