Configuring Accounting Methods For An Isp Domain - HP 6125XLG Configuration Manual

Step
2. Enter ISP domain view.
3. Specify the default
authorization method for
all types of users.
4. Specify the command
authorization method.
5. Specify the authorization
method for LAN users.
6. Specify the authorization
method for login users.

Configuring accounting methods for an ISP domain

Configuration prerequisites
Before configuring accounting methods, complete the following tasks:
1. Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type.
2. Determine whether to configure the default accounting method for all access types or service types.
The default accounting method applies to all access users, but it has a lower priority than the
accounting method that is specified for an access type or service type.
Configuration guidelines
When configuring accounting methods, follow these guidelines:
• Login users who use FTP services do not support accounting.
Local accounting does not provide statistics for charging. It only counts and controls the number of
•
concurrent users who use the same local user account. The threshold is configured by using the
access-limit enable command.
Configuration procedure
To configure accounting methods for an ISP domain:
Command
domain isp-name
authorization default { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
authorization command { hwtacacs-scheme
hwtacacs-scheme-name [ local [ none ] |
local [ none ] | none }
authorization lan-access { local [ none ] |
none | radius-scheme radius-scheme-name
[ local ] [ none ] }
authorization login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
43
Remarks
N/A
By default, the authorization
method is local.
The none keyword is not
supported in FIPS mode.
By default, the default
authorization method is used
for command authorization.
The none keyword is not
supported in FIPS mode.
By default, the default
authorization method is used
for LAN users.
The none keyword is not
supported in FIPS mode.
By default, the default
authorization method is used
for login users.
The none keyword is not
supported in FIPS mode.