Table of Contents
Advertisement
Getting Started
Conventions
1-4
Screen Simulations
Displayed Text. Figures containing simulated screen text and command
output look like this:
ProCurve> show version
Image stamp:
/sw/code/build/info
July 1, 2006 13:43:13
T.11.01
139
ProCurve>
Figure 1-1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden-
tification. For example:
ProCurve(config)# clear public-key
ProCurve(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile
Port Identity Examples
This guide describes software applicable to both chassis-based and stackable
ProCurve switches. Where port identities are needed in an example, this guide
uses the chassis-based port identity system, such as "A1, "B3-B5", "C7", etc.
However, unless otherwise noted, such examples apply equally to the stack-
able switches, which typically use only numbers, such as "1", "3-5", "15", etc.
for port identities.
Configuration and Operation Examples
Unless otherwise noted, examples using a particular switch model apply to all
switch models covered by this guide.
Keys
Simulations of actual keys use a bold, sans-serif typeface with square brackets.
For example, the Tab key appears as
and the "Y" key appears as
[Tab]
.
[Y]
Advertisement
Table of Contents
