Table of Contents
Advertisement
SCENE parameter
PRESENCE
ABSENCE
1 – 20
Table 53: SCENE setting options
Setting day(s) and fade speed
Figure 155: SWITCH TIME - FADE settings level
Note
• The day(s) on which the scene is recalled and the fade speed with which the scene is recalled are
defined here. The scene is only recalled on the set day(s) and only if the condition is met at the set
start time.
– Start point: SWITCH TIME - FADE settings level
1.
Select WHEN.
= WHEN illuminates.
2.
Run your finger along the touchring until the desired setting appears.
3.
Select FADE.
= FADE illuminates.
4.
Run your finger along the touchring until the desired number appears.
5.
Select SAVE to save the settings.
= The message SAVED briefly appears.
= Day and fade speed settings are saved.
= GROUP - TYPE settings level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
Parameter
WHEN
Table 54: WHEN setting options
FADE parameter
FADE
Table 55: FADE setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
The presence scene is recalled if the condition is met at the
start time.
The absence scene is recalled if the condition is met at the start
time.
The scene with the selected number is recalled if the condition
is met at the start time.
Value range
ALWAYS, MO, TU, WE, TH,
FR, SA, MO-FR, SA-SU
Value range (in seconds)
0, 1, 3, 5, 7, 10, 15, 30, 60
Commissioning the field level
Description
Factory setting
ALWAYS
Factory setting
0 seconds
99
Advertisement
Chapters
Table of Contents
