Table of Contents
Advertisement
553 Configuring the action click
Path: SERVICE MENU / INTERNAL / CONFIGURATION / ACTION CLICK
Figure 73: ACTION CLICK settings level
– Start point: ACTION CLICK settings level
1.
Select LEVEL.
= LEVEL illuminates.
2.
Run your finger along the touchring until the desired setting appears.
3.
Select TEST to check the action click volume level.
= An action click is heard at its set level.
4.
Select SAVE to save the setting.
= Action click setting is saved.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
• The action click setting applies to both the touchring and the touchscreen buttons.
Parameter
LEVEL
Table 7: LEVEL setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Value range
0, 1, 2, 3, 4
(0 = no action click,
4 = loud action click)
Factory setting
0
42
Advertisement
Chapters
Table of Contents
