Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use page 64

3. Select NEXT.
= SYMBOL settings level appears.
4. To change the icon and adjust other settings, see Section
5933 Arranging group icons
Path: SERVICE MENU / INTERNAL / GROUPS
Figure 112: GROUPS selection level
– Start point: GROUPS selection level
1. Select SORT.
= SORT settings level appears.
Figure 113: SORT settings level
2. Select the icon to be moved.
= Icon illuminates.
= Icon freezes in the centre of the touchscreen.
3. Run your finger along the touchring.
= The other icons change position.
4. When the selected icon reaches the desired position, touch it again.
= Icon is no longer illuminated.
= Icon is set to the new position.
5. Repeat steps 2–4 until all icons are arranged as desired.
6. Select SAVE to save the settings.
= The message SAVED briefly appears.
= Settings are saved.
= Group icons are rearranged in the entry level.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
• Only the icon in the centre of the touchscreen can be selected for rearrangement.
• The numbers under the icons represent the order of the icons.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
5.9.3.1 Adding group icons.
64