Adjusting The Lighting For Luminaire Groups - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

410 Adjusting the lighting for luminaire groups

– Start point: entry level
1. Touch the navigation buttons until the group icon is displayed.
= Group icon is displayed.
Figure 48: Group icon
2. Select GROUPS.
= Selection level appears.
Figure 49: Selection level
3. Use the navigation button to access other groups.
= Other groups are displayed.
4. Select the luminaire group for which the lighting must be adjusted.
= Settings level appears.
Figure 50: BRIGHTNESS settings level
5. Run your finger along the touchring.
Figure 51: Touchring
= BRIGHTNESS display appears.
Figure 52: BRIGHTNESS display
= Luminaire group lighting is adjusted.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Kapitel
30