Building Service Group Icons (Selection Level); Building Service Icons; Scene Icon When Scene Has Been Automated For Daylight Linking - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

Scene automated for daylight linking
Scenes can be automated for daylight linking. A daylight-linked automated scene is indicated by an
arrow pointing to the bottom right-hand corner of the corresponding scene icon.
Figure 4: Scene icon when scene has been automated for daylight linking
Automated scene sequence
A scene sequence can be started by recalling a scene. The sequence is indicated by the text SEQU in
the header.
Figure 5: SEQU for scene icon when scene sequence has been automated
Building service
Building services are displayed as buttons using building service icons. Selecting a button chooses that
building service for operation.
Figure 6: Building service icons
Groups
Building services can be separated into their own groups. The building services in each group can then
be operated together.
If there are multiple groups for a building service, these groups are numbered. The group number is
displayed in the lower right-hand corner of the group icon. Building service groups can be accessed by
selecting GROUPS.
Figure 7: GROUPS (entry level)
Figure 8: Building service group icons (selection level)
Figure 9: Operating buttons (settings level)
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Introduction
11