Lm-Ciria Control Unit; Overview; Touchscreen Function; Touchring - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

3 LM-CIRIA control unit

31 Overview

DESK MEETING BEAMER
Figure 13: LM-CIRIA control unit
1 Touchscreen
The touchscreen is used to recall scenes and navigate within selection and settings levels.
2

Touchring

The touchring is used to manually adjust the lighting, move blinds and navigate to desired values in
the settings levels.
3 On/off key
The on/off key is used to recall a presence or absence scene.

32 Touchscreen function

Figure 14: Touchscreen
1 Header
2 Buttons
3 Navigation buttons
4 Footer
The touchscreen is used to recall scenes and navigate within entry, selection and settings levels.
Touching a button on the touchscreen selects its corresponding function. The button illuminates as
confirmation that it has been selected. The selection can also be confirmed with an audible action click
(factory setting: action click is disabled).
Note
• If a button is not selected within a specific time (return timeout), the touchscreen display switches
automatically to the entry level. The return timeout is set when the system is commissioned.
• If the area between two selections is touched on the touchscreen, no function is selected.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
1
2
3
1
2
3
4
LM-CIRIA control unit
15