Table of Contents
Advertisement
= Option is illuminated.
Figure 107: NUMBER settings level
9.
Run your finger along the touchring until the desired number appears.
10. Select NEXT.
= TYPE settings level appears.
= Option is illuminated.
Figure 108: TYPE settings level
11. Run your finger along the touchring until the desired building service type appears.
12. Select NEXT.
= TOUCHRING DIRECTION settings level appears.
= Option is illuminated.
Figure 109: TOUCHRING DIRECTION settings level
13. Run your finger along the touchring until the desired setting appears.
14. Select SAVE to save the settings.
= The message SAVED briefly appears.
= Settings are saved.
= The new building service icon can be accessed in the entry level.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
Parameter
NUMBER
Table 20: NUMBER setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Value range
1, 2, 3, ... 99
62
Advertisement
Chapters
Table of Contents
