Configuring The Entry Level; Scene Icons; Name Settings Level; Symbol Settings Level - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

59 Configuring the entry level

The entry level can be adapted so that all of the information and functions relevant for daily use can be
accessed directly. You can configure how many scene, group and building service icons are displayed
and in what order they appear. Scene and group names can be edited and set to be displayed or not
displayed in the entry level. Group and building service icons can be created either manually or auto-
matically by the LM-CIRIA control unit.

591 Scene icons

Up to 20 scene icons can be created for the entry level and displayed in any order.
5911 Adding scene icons
Note
• If no more icons can be added, the message MAXIMUM NUMBER OF KEYS appears.
Path: SERVICE MENU / INTERNAL / OPERATION / ADD
Figure 81: ADD selection level
– Start point: ADD selection level
1. Select SCENE.
= SYMBOL settings level appears.
Figure 82: SYMBOL settings level
2. Run your finger along the touchring until the desired icon appears.
3. Select NEXT.
= On/off key LED illuminates.
= NAME settings level appears.
= The next available position in the default scene name illuminates.
Figure 83: NAME settings level
4. Run your finger along the touchring until the desired letter or number for the desired position in the
name is illuminated.
5. Press the on/off key to accept the letter/number.
= The letter or number is accepted.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
50