Table of Contents
Advertisement
Setting the fade speed and assigning a building service type
Figure 180: FADE - TYPE settings level
– Start point: FADE - TYPE settings level
1.
Select FADE.
= FADE illuminates.
2.
Run your finger along the touchring until the desired number appears.
3.
Select TYPE.
= TYPE illuminates.
4.
Run your finger along the touchring until the desired number appears.
5.
Select SAVE to save the settings.
= The message SAVED briefly appears.
= Fade speed and building service type are saved.
= ROOM - GROUP settings level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• To create a new sequence directly (without saving), select NEXT SEQUENCE.
FADE parameter
FADE
Table 76: FADE setting options
Building service type
COMMON (all building services)
Brightness
Blind position
Slat angle
Screen
Colour temperature
Window
Curtain
Temperature
Air exchange
Table 77: Selection of TYPE setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Value range (in seconds)
0, 1, 3, 5, 7, 10, 15, 30, 60
Building service type number
1
2
3
4
10
13
65
64
11
39
Commissioning the field level
Factory setting
0 seconds
115
Advertisement
Chapters
Table of Contents
