Editing Scene Sequences - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

692 Editing scene sequences

Path: SERVICE MENU / EXTERNAL / LM-ZSQ
Figure 182: SEQUENCE selection level
– Start point: SEQUENCE selection level
1. Select and hold NEXT SEQUENCE until the scene sequence to be edited appears in the header.
2. Select EDIT.
= START TIME settings level appears.
3. To edit the scene sequence, proceed as described in Section
693 Deleting scene sequences
Path: SERVICE MENU / EXTERNAL / LM-ZSQ
Figure 183: SEQUENCE selection level
– Start point: SEQUENCE selection level
1. Select and hold NEXT SEQUENCE until the scene sequence to be deleted appears in the header.
2. Select DELETE twice.
= Scene sequence is deleted in the LM-ZSQ sequencer.
= The text SEQUENCE -- appears.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Commissioning the field level
6.9.1 Creating scene sequences.
117