Screensaver - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

5102 Screensaver

Path: SERVICE MENU / INTERNAL / CONFIGURATION / DISPLAY / SCREENSAVER
Figure 137: SCREENSAVER settings level
– Start point: SCREENSAVER settings level
1. Select BEHAVIOUR.
= BEHAVIOUR illuminates.
2. Run your finger along the touchring until the desired setting appears.
3. Select WAIT FOR.
= WAIT FOR illuminates.
4. Run your finger along the touchring until the desired setting appears.
5. Select SAVE to save the settings.
= Screensaver setting is saved.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
BEHAVIOUR parameter
INACTIVE
DYNAMIC
DARK
Table 32: BEHAVIOUR setting options
Parameter
WAIT FOR
Table 33: WAIT FOR setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
The current touchscreen display remains visible.
The name of the recalled scene is displayed at intervals on the
screensaver.
The screensaver is enabled; the touchscreen is dark.
Value range
1, 2, 3, ... 99
Description
Factory setting
20 MINUTES
78