Table of Contents
Advertisement
562 Assigning the fade speed
Path: SERVICE MENU / INTERNAL / CONFIGURATION / FADE OF KEY
Figure 75: FADE OF KEY settings level
– Start point: FADE OF KEY settings level
1.
Select PRESENCE.
= PRESENCE illuminates.
2.
Run your finger along the touchring until the desired number appears.
3.
Select SAVE to save the setting.
= Fade speed for presence scene is saved.
= The previous selection level appears.
4.
To assign the fade speed to an absence scene, carry out steps 1–3, but select ABSENCE instead.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
Parameter
PRESENCE
ABSENCE
Table 9: FADE OF KEY setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Value range (in seconds)
0, 1, 3, 5, 7, 10, 15, 30, 60
0, 1, 3, 5, 7, 10, 15, 30, 60
Factory setting
0
0
44
Advertisement
Chapters
Table of Contents
