Delay Time Max Setting Options; Delay Time Min Setting Options - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• To switch to the START SCENE settings level directly (without saving), select NEXT STEP.
Parameter
MINUTES
SECONDS
Table 63: DELAY TIME MIN setting options
Defining a maximum delay time for scene changes
Figure 165: DELAY TIME MAX settings level
– Start point: DELAY TIME MAX settings level
6. Select MINUTES.
= MINUTES illuminates.
7. Run your finger along the touchring until the desired number appears.
8. Select SECONDS.
= SECONDS illuminates.
9. Run your finger along the touchring until the desired number appears.
10. Select SAVE to save the settings.
= The message SAVED briefly appears.
= Maximum delay time is saved.
= SEQUENCE selection level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• If no delay time is defined, a random delay time of between 2 and 10 minutes is automatically
applied.
• To switch to the START SCENE settings level directly (without saving), select NEXT STEP.
Parameter
MINUTES
SECONDS
Table 64: DELAY TIME MAX setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Commissioning the field level
Value range
0 – 99
0 – 59
Value range
0 – 99
0 – 59
106