Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use page 68

Building service type
COMMON (all building services)
Brightness
Blind position
Slat angle
Screen
Colour temperature
Window
Curtain
Temperature
Air exchange
Table 24: Selection of TYPE setting options
TOUCHRING DIR parameter
NORMAL
INVERSE
Table 25: TOUCHRING DIR setting options
5942 Changing bus address icons
Path: SERVICE MENU / INTERNAL / GROUPS
Figure 122: GROUPS selection level
– Start point: GROUPS selection level
1. Select EDIT.
= EDIT settings level appears.
Figure 123: EDIT settings level
2. Run your finger along the touchring until the desired icon appears.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Building service type number
1
2
3
4
10
13
65
64
11
39
If you run your finger clockwise along the touchring, the building
service in operation will react as follows:
Luminaires: brighten; colour temperature increases
Blinds: move upwards
If you run your finger anti-clockwise along the touchring, the
building service in operation will react as follows:
Luminaires: dim; colour temperature decreases
Blinds: move downwards
If you run your finger along the touchring, the building service in
operation will react in reverse to the NORMAL settings.
Description
68