57 Configuring the on/off key LED
The behaviour of the on/off key LED can be adapted to suit individual requirements. You can configure
whether the LED illuminates, under which conditions it illuminates and how bright it is.
571 Configuring LED behaviour
Path: SERVICE MENU / INTERNAL / CONFIGURATION / LED OF KEY
Figure 78: LED OF KEY settings level
– Start point: LED OF KEY settings level
1.
Select BEHAVIOUR.
= BEHAVIOUR illuminates.
2.
Run your finger along the touchring until the desired setting appears.
3.
Select SAVE to save the setting.
= LED behaviour setting is saved.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
BEHAVIOUR parameter
ALWAYS ON
ALWAYS OFF
ON IF ABSENCE
ON IF PRESENCE
Table 12: BEHAVIOUR setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
On/off key LED is always on.
On/off key LED is always off.
On/off key LED only illuminates if an absence scene is enabled.
On/off key LED only illuminates if a presence scene is enabled.
Description
47