Completely Opening Or Closing The Slats; Blinds Display - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

2. Run your finger along the touchring.
Figure 29: Touchring
= BLINDS display appears.
Figure 30: BLINDS display
= Blinds move upwards or downwards.
Note
• Move blinds upwards: run your finger clockwise along the touchring.
• Move blinds downwards: run your finger anti-clockwise along the touchring.
This is the factory setting; this setting is defined when the system is commissioned (TOUCHRING DIR
parameter).
• Stop positioning adjustment: pause finger or remove from touchring.

433 Completely opening or closing the slats

1. Select SLATS.
= Settings level appears.
Figure 31: SLATS settings level
2. Select OPEN to completely open the slats.
= OPEN illuminates.
= Slats open completely.
3. Select CLOSE to completely close the slats.
= CLOSE illuminates.
= Slats close completely.
4. Select STOP to stop the slats when they are opening or closing.
= STOP illuminates.
= Slats stop opening / closing.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Operation
22