Outputs Setting Options - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

= The next unaddressed output of the same building service type responds.
9. Repeat steps 1–7 to address the remaining outputs.
Note
• The outputs automatically take the room address of the LM-CIRIA control unit.
Building service type
COMMON (all building services)
Brightness
Blind position
Slat angle
Screen
Colour temperature
Window
Curtain
Temperature
Air exchange
Table 40: Selection of TOUCHRING TYPE setting options
Parameter
GROUP
BUS ADDR.
Table 41: OUTPUTS setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Building service type number
1
2
3
4
10
13
65
64
11
39
Value range
1 – 99
1 – 99
Commissioning the field level
86