Changing The Colour Temperature Of A Luminaire Group - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

Notes
• Brighten: run your finger clockwise along the touchring.
• Dim: run your finger anti-clockwise along the touchring.
This is the factory setting; this setting is defined when the system is commissioned (TOUCHRING DIR
parameter).
• Stop lighting adjustment: pause finger or remove from touchring.

411 Changing the colour temperature of a luminaire group

– Start point: entry level
1. Touch the navigation buttons until the group icon is displayed.
= Group icon is displayed.
Figure 53: Group icon
2. Select GROUPS.
= Selection level appears.
Figure 54: Selection level
3. Use the navigation button to access other groups.
= Other groups are displayed.
4. Select the luminaire group for which the colour temperature must be changed.
= Settings level appears.
Figure 55: Settings level.
5. Run your finger along the touchring.
Figure 56: Touchring
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Operation
31